7hertz

zebranet setup unlisted print server

· · (0) · ·

zebranet view
menu: tools
setup unlisted ip print server :

This feature is used to assign IP addresses to unconfigured print servers (at factory default settings) on remote networks. When a print server is unable to obtain an IP address through DHCP, BOOTP or RARP, it will eventually default to an address of 198.102.102.254. This default address allows the utility to communicate with and configure the print server on a local subnet. However, if the print servers is on a remote subnet, the router will not likely route the packets to the print server correctly. This feature allows a valid IP address to be broadcast to the remote subnet for the print server to use.